Product: DIY Brooklyn Skyline Kits
I think images of artwork are great. But I think videos of artwork being created are so much better. That must mean that GoPro videos from the perspective of the artist creating a piece are the best! At least that’s my theory… which brings us to today’s Gift Lab. I took you out to the beach in my last blog post to demo a product. This time around, you’re going inside my head to see something cool get built from the bottom up.
Our DIY Brooklyn Skyline Kits offer the chance for you to craft a mini version of two signature structures in New York, the Kentile Floors sign and your ordinary rooftop water tower. It caught my eye after I saw the two shots of custom designed water towers on our product page.
Perfect product to test my theory with! First off, these are hot. Nice job Zero Productivity and Atomiko. But more importantly, I can gauge how well we’re able to see something being constructed and designed, without spending hours on hours doing it. I haven’t drawn anything in years. A lot of effort would’ve been needed to produce something that gives my 5-year-old self some competition.
I was also glad to see that two different versions of the kit existed. While doing research on best practices for filming (read: watching GoPro videos on Youtube), I found it difficult to tell which GoPro dock to use for this; chest mount or head mount? So I bought both. I decided that I’d use one mount for one kit and another mount for the other.
Two DIY Brooklyn Skyline kits, two mounts, and one GoPro in hand later… the test was ready to begin.
I started with the Water Tower kit first, for no other reason than wanting to get closer to fantasizing about being a graffiti artist. After I laid all of the cardboard pieces on the table as instructed, I strapped the GoPro chest mount on, pressed record and got to work.
Here’s a closeup of the major pieces made for the water tower.
Now it was time to design it. I grabbed a pack of Crayola markers and started doodling.
The first immediate takeaway – Tagging my water tower before building it would’ve been the better idea. The advantage of utilizing a flat surface didn’t cross my mind even slightly; until it was time to record myself doing it. That explains the split between the clips. I had to game plan.
The other thing was the actual video. In order to learn more about using the GoPro, I turned to Wistia.com’s #GoProWeek as a resource. Every day for that week, they shared a different pro tip (no pun intended) for getting the best shot. One of the techniques I used was the time-lapse recording feature that snaps pictures every few seconds, instead of actually recording straight through. I wasn’t a fan of the final result, because the footage came out too choppy. I think I set the timer in between shots too far apart. I decided to make sure to use the other recommended method for the next kit; shooting normally and speeding up the footage in a video editor.
Besides that, the rest of the process was smooth sailing and more fun than expected. The maker’s of the kits provided clear step-by-step assembly directions and all pieces worked as intended. Any edge that needed folding went over smoothly. The laser cut tabs and indents fit perfectly into each other. Connecting the pieces was a snap (that pun, intended). The biggest surprise was the glue; it did not leave a mess on my hands or the table I worked on. It comes already setup in drops that are separated by perforated plastic. When the instructions tell you to grab one, just rip one dot from the pack, peel off the plastic covering, and apply to the marked area. That easy.
Next up was recording the Kentile Floors sign DIY kit with the GoPro attached to the head mount. You’ll notice that it begins with me filling in the letters first, and then moving on to putting it together.
The simplicity of the structure’s design made assembly much quicker. There wasn’t much of a surface to draw on but filling in the narrow letters required a little bit of time. I really like the point of view that the head cam captured. It feels like you’re actually putting it together rather than observing someone else do it.
All in all, I’m convinced that my theory is correct. Watching art creation from a GoPro perspective is a cool experience that helps anyone appreciate the process behind the final result more. It’s amazing to see what goes into pieces, especially from our assortment, I’d imagine. We have a wide selection of uncommon goods that obviously require an uncommon approach to create.
In retrospect, I see where areas for improvement lay. In a future flick, I would:
- Adjust the speed back to its normal rate at certain points in the video. There are some scenes where it would have made a better experience, such as when I was working on a small detail like applying the glue dots. It also would’ve been a great way to end it so you see the final product as it is just completed.
- Angle the GoPro camera on the head mount down a few more degrees.
- Add some background music.
The Skyline Kits made for a great GoPro test run, and I’d definitely recommend them to someone looking for a fun and easy DIY. What’s even better? I’m left with two new desk additions that visitors can stop and admire. Long overdue, since the Levitron Lamp had been retired for some time now.